首页 \ 关于远东

 3G三螺杆泵
 SM三螺杆泵
 SN三螺杆泵
 SPF三螺杆泵
 双螺杆泵
 单螺杆泵
 齿轮泵
 离心泵
 NYP高粘度泵
 不锈钢齿轮泵
 磁力驱动齿轮泵
 船用泵
 水电站专用螺杆泵
 真空泵
 离心机
 

 首页   关于远东    产品目录    销售网络    生产设备   技术支持    公司资质     联系我们
热沥青齿轮泵用RCB保温齿轮泵设备先进,加工精度高

    热沥青齿轮泵分为普通与铸钢两种材质,均带有保温夹套,保温泵适用于常温下有凝固性或结晶而通过加温并保持一定温度又容易流动且有润滑性的液体,以及高寒地区室外安装和工艺过程中需要保温的场合,泵开始工作时首先预热降低了泵的起动功率。适用于输送有腐蚀性或无腐蚀性、卫生条件要求较高的液体,输送介质不含固体颗粒,温度不高于 350 ℃,粘度为 5cSt —— 1500cSt 的液体,如各种化工原料、灌装医药、食品、化妆品、农药、洗涤剂、印染、酿造、树脂、胶类等行业。该泵传动方式有电机直联和减速机两种,当液体粘度超过 1500cSt 时,应采用减速机传动。 RCB asphalt heat pump can be divided into ordinary and cast steel material, with thermal insulation jacket, heat pump under applicable interesting coagulability and crystallization and by heating and maintain a certain temperature and easy flow and lubricity of liquid, in the process of the high altitude and outdoor installation process and need to heat preservation, pump starts to work when the first preheating reduced the starting power of the pump.Applicable to transport corrosive or non-corrosive, health conditions to demand higher liquid, medium not containing solid particles, the temperature is not higher than 350 ℃ , the viscosity of liquid for 5 CST - 1500 CST, such as filling a variety of chemical raw materials, pharmaceutical, food, cosmetics, pesticide, detergent, printing and dyeing, brewing, resin, rubber and other industries.The pump drive way has two kinds of motor and deceleration machine, when more than 1500 CST liquid viscosity reducer drive should be adopted.
    热沥青齿轮泵的泵体设有空心夹层,并设有进出口法兰,可用于导热油、蒸气、热水、等媒体对输送的液体和泵进行加热保温及冷却该泵传动方式有电机直联和减速机两种,当液体粘度超过 1500cSt 时,应采用减速机传动。 Asphalt heat pump pump body has a hollow interlayer, with import and export of flange, can be used in the thermal oil, steam, hot water, such as the media for the transportation of liquid and pump heat insulation and cooling ways there are to the pump drive motor and deceleration machine two, when more than 1500 CST liquid viscosity reducer drive should be adopted.
    热沥青齿轮泵结构形式: Asphalt insulation gear pump structure:
   泵体设有空心夹层,并设有进出口法兰,可用于导热油、蒸气、热水等媒体对输送的液体和泵进行加热保温及冷却。 Pump body has a hollow sandwich, with import and export of flange, can be used in the thermal oil, steam, hot water and other media for conveying liquid and heat insulation and cooling pump.

    适用范围: Scope of application:
  适用于输送无腐蚀性、不含固体颗粒、在常温下有凝固性的介质,尤其适用于高寒地区室外安装和工艺过程中介质需要保温的场合,介质温度可达 250 ℃、粘度为 5-1500cst 。 Is applicable to transport non-corrosive, not containing solid particles, at room temperature with coagulability medium, especially in cold area outdoor media need to heat preservation in the process of installation and process, medium temperature can reach 250 ℃ , the viscosity of 5 to 1500 CST.

    用途说明:为输送常温下变稠,凝固或结晶而维持一定温度又容易流动的介质而设计的,如沥青、石蜡、松香及性质类似的液体,温度不高于 200 ℃。 Purpose: For transport has thickened under normal temperature, solidification or crystallization and maintain a certain temperature and easy flow of medium, such as asphalt, paraffin wax, rosin and properties similar liquid, the temperature is not higher than 200 ℃ .

输送澄清油泵 3GCR100*2W21三螺杆泵 山东远东国际化工有限公司
污油污水泵 G135-2V-W102单螺杆泵 山东大成化工集团有限公司
粘胶液输送泵 NYP220-RU-T1-W11高粘度泵 中国中油能源集团股份有限公司
灌封胶泵 NYP50-RU-T1-W11高粘度泵 宁夏金昱元化工集团有限公司
润滑脂输送泵 3GR100*4W21三螺杆泵 龙口太行颜料有限公司
油墨输送泵 RCB8保温齿轮泵 甘肃刘化(集团)有限责任公司
污油回收泵 G40-2V-W112单螺杆泵 上海中科合臣股份有限公司
输送油泥泵 G50-2V-W201单螺杆泵 山东齐隆化工股份有限公司
输送污水泵 G40-2V-W201单螺杆泵 贵州红星发展股份有限公司
热沥青齿轮泵 RCB10保温齿轮泵 山东侨昌化学有限公司
水煤浆输送泵 3GR110*4W21三螺杆泵 江苏宏达新材料股份有限公司
煤焦油输送泵 3GN110*4W21三螺杆泵 江苏宏信化工有限公司
热火装置点火油泵 3GS160D*3W21三螺杆泵 河南雄壮肥业有限公司
热沥青齿轮泵 RCB12保温齿轮泵 青州欧宝塑业有限公司
棕榈油输送泵 3GS200D*3W21三螺杆泵 河北鱼鹰涂料集团有限公司
密封胶输送泵 NYP320B-RU-T1-W11高粘度泵 江西昌九生物化工股份有限公司
高粘度乳液泵 SNH660R46K2W2三螺杆泵 甘肃(瓮福)化工有限责任公司
改性硅油输送泵 RCB6保温齿轮泵 河北三高集团安增肥业有限公司
热沥青齿轮泵 RCB-29保温齿轮泵 江苏九九久科技股份有限公司
输送齿轮油泵 SNH660R46U12.1W2三螺杆泵 江苏蓝丰生物化工股份有限公司
合成原油渣泵 SNH660R51U12.1W2三螺杆泵 北京恒聚化工集团有限责任公司
输送橄榄油泵 SNH80R36U12.1W21泵头 浙江威尔达化工有限公司