首页 \ 关于远东

 3G三螺杆泵
 SM三螺杆泵
 SN三螺杆泵
 SPF三螺杆泵
 双螺杆泵
 单螺杆泵
 齿轮泵
 离心泵
 NYP高粘度泵
 不锈钢齿轮泵
 磁力驱动齿轮泵
 船用泵
 水电站专用螺杆泵
 真空泵
 离心机
 

 首页   关于远东    产品目录   销售网络    生产设备     公司资质    技术支持    联系我们
3G三螺杆泵(煤焦油泵,输送合成树脂泵)的特点以及性能参数表

    3G型三螺杆泵(煤焦油泵,输送合成树脂泵)用来输送温度≤150℃、 粘度5-760cSt、不含固体颗粒、无腐蚀性、具有润滑性能的介质。 3 g type three-screw pump transport synthetic resin (coal tar oil pump, the pump) is used to transfer temperature 150 ℃, the viscosity of 5 or less - 760 CST, not containing solid particles, non-corrosive, has the lubrication performance of the medium.
    适用压力范围:0.6-2.5Mpa; 适用流量范围:0.6-123m 3 /h。 Apply pressure range: 0.6 to 2.5 Mpa; Applicable flow range: 0.6-123 - m 3 / h
    主要应用于燃油输送、液压工程、船舶工程,石化及其他工业。Mainly used in the fuel transfer, hydraulic engineering, Marine engineering, petrochemical and other industries.
    (1)介质为直线连续输送,无搅拌,无脉动; (2)振动小,噪音低; (3)压力高、效率高; (4)结构简单,拆装方便; (5)体积小重量轻; (6)磨损轻微,寿命长。 (1) medium for linear continuous transmission, without stirring, without a ripple;(2) the little vibration, low noise;(3) high pressure, high efficiency;(4) simple structure, easy to tear open outfit;(5) small size light weight,(6) minor wear and tear, long life.
3G三螺杆泵主杆

   例:3G25×4-46
3G:三螺杆泵
25:螺杆外径25mm
4:螺杆螺距数目4个
46:螺杆的螺旋角46°
R:重质燃油
r:轻质燃油
W:高温加热油
N:高粘油料
A:改进设计
S:双吸
3G型三螺杆泵(煤焦油泵,输送合成树脂泵)特点 :
   1、介质为直线连续输送、无搅拌、无脉动。 2、振动小,噪音低。 3、压力高、效率高。 4、结构简单、拆装方便。 5、体积小,重量轻。 6、磨损轻微,寿命长。 1, medium for linear continuous transmission, without stirring, without pulsation.2, small vibration, low noise.3, high pressure and high efficiency.4, simple structure, convenient tear open outfit.5, small volume, light weight.6, wear light, long service life.
   一般采用机械密封(特殊要求,可选用磁力驱动,零泄露结构)。泵通过爪型联轴器由电动机驱动。从主轴外伸端向泵年,为顺时针旋转。 Generally adopts mechanical seal (special requirements, can choose magnetic drive, zero leakage structure).Pump driven by motor through claw type coupling.To pump from the main shaft overhang end years for clockwise.
   主、从螺杆16MnCrS5,40Cr,45,38CrMoALA
泵体:HT200,QT450-10,ZCuSn10Pl,ZG270-500
3G型通用螺杆泵按泵的用途分类共分为5个系列

系列代号 主要用途 性能范围
流量 m 3 /h 压力 MPa
3G 输送3-20oE润滑油,温度≤80℃,Lub oil visc3-20oE;temp≤80℃ 0.6-570 2.5
3GR 输送3-50oE重质燃油,温度≤120℃,Heavy feul lil visc3-50oE;temp≤120℃ 0.6-570 2.5
3GR 输送1.2-5oE轻质燃油,温度≤120℃,Light feul oil visc1.2-5oE;temp≤120℃ 0.6-570 1.6
3GW 输送高温加热燃油,温度≤150℃,High temp feul heated oil;temp≤150℃ 0.6-363 1.6
3GN 输送100oE高粘度油料,温度≤80℃,High visc oil 100oE;temp≤80℃ 0.6-636 2.5
型号 排出压力
P
MPa
流量
Q
转速
n
r/min
必需汽
蚀余量
r
m
效率
η
%
电动机
m 3 /h L/min 功率kw 型号
25×4-46 1.0 0.8 13 1450 4 62 0.75 Y802-4
2.5 0.6 10 60.6 1.5 Y90L-4
1.0 2.0 33 2900 4.5 59.4 1.5 Y90S-2
2.5 1.6 26 69 3 Y100L-2
30×4-46 1.0 1.6 26 1450 4.5 63.5 1.1 Y90S-4
2.5 1.2 20 61 2.2 Y100L1-4
1.0 3.6 60 2900 5 60 2.2 Y90L-2
2.5 3.2 53 69 4 Y112M-2
36×4-46 1.0 2.8 46 1450 4.5 66 2.2 Y100L1-4
2.5 2.4 40 66.5 4 Y112M-4
1.0 6.5 108 2900 5 60.5 4 Y112M-2
2.5 6 100 72 7.5 Y132S2-2
42×4-46 1.0 4.8 80 1450 5 62 4 Y112M-4
2.5 4.2 70 73 5.5 Y132S1-4
1.0 10.5 175 2900 5.5 61 5.5 Y132S1-2
2.5 10 166 72 15 Y160M2-2
45×4-46 1.0 6.3 106 1450 5 70 3 Y100L2-4
2.5 5.9 99 74 7.5 Y132M-4
1.0 13.5 225 2900 5.5 60 7.5 Y132S2-2
2.5 13 217 75 15 Y160M2-2
60×4-46 1.0 15.5 255 1450 5 71.3 11 Y160M-4
2.5 14.5 245 74 15 Y160L-4
1.0 32 533 2900 5.5 63 18.5 Y160L-2
2.5 31.5 525 77 37 Y200L2-2
70×2-46 0.6 24 400 1450 5 71 7.5 Y132M-4
1.0 23.5 390 75 11 Y160M-4
1.6 22.5 370 76 15 Y160L-4
70×4-46 1.0 24.5 408 1450 5 72.5 18.5 Y180M-4
2.5 23.5 392 79 30 Y200L-4
80×2-46 0.6 36.5 608 1450 5 72 11 Y160M-4
1.0 35 594 75.5 18.5 Y180M-4
1.6 34.5 575 76.5 22 Y180L-4
80×4-46 1.0 37 617 1450 5.5 72 30 Y200L-4
2.5 35 590 78.1 45 Y225M-4
100×2-46 0.6 72.5 1208 1450 5 73 22 Y180L-4
1.0 71 1183 77 37 Y225S-4
1.6 60.5 1158 79 45 Y225M-4
100×4-46 1.0 72.5 1208 1450 5.5 73 55 Y250M-4
2.5 70 1165 78.5 75 Y280S-4
S100×3-27 0.6 72 1196 1450 6 62 22 Y180L-4
1.6 70 1160 72 55 Y250M-4
2.5 69 1145 74 75 Y280S-4
S120×3-27 0.8 123 2055 1450 6 74.5 55 Y250M-4
1.5 120 2010 76 90 Y280M-4
2.5 115 1920 78.5 132 Y315M-4

相关产品:

 

地址:河北省泊头市道东街88号   E_MAIL:hbydby@126.com
电话:0317-8223128 8185077 8263980 传真:0317-8185499