夹套保温泵适宜输送输送高粘度树脂,聚氨酯,聚醚等介质泵

    夹套保温泵的结构特点:The structure of the jacketed heat pump features:
    夹套保温泵用于输送高粘度树脂,聚氨酯,聚谜,聚乙烯等类似的高粘度物料，夹套保温泵是根据石油、化工、涂料、油脂、医药、染料、食品等行业的需求，研制开发的新型容积式泵，由于该产品可选用不同的材质和其独特的结构，夹套保温泵、保温泵广泛应用于不同性质，不同粘度的介质输送。 　
     适用介质温度：-10℃ —200℃。适用介质粘度：1.0cSt—300,000cSt。 Jacketed heat pump used to transport high viscosity resin, polyurethane, polyethylene mystery, polyethylene and other similar high viscosity material, jacketed heat pump is according to the petroleum, chemical industry, paint, oil, medicine, dyes, food and other industries demand, research and development of a new type of positive displacement pump, because the product can choose different material and its
independence, the structure of the jacketed heat pump, heat pump is widely used in different nature, different viscosity of medium transmission.Applicable medium temperature: - 10 ℃, 200 ℃.Applicable medium viscosity: 1.0 cSt - 300000 cSt.
　  优点（1）输送液体平稳，无脉动，振动小，噪音低。 　（2）有很强的自吸性能。 　（3）正确选用零件材料，可输送多种有腐蚀性的介质，使用温度可200℃。 　（4）内外转子Advantages: (1) smooth conveying liquid, no pulsation, little vibration, low noise.(2) has a strong self-priming performance.(3) the
correct selection of component materials, can transport a variety of corrosive medium, using temperature is 200 ℃.(4) inner and outer rotor
    用途:USES:别适用高粘度稠度介质的输送。泵头部、泵壳体、密封腔部分均可以带保温夹套。根据实际需要选择需要保温的位置。夹套与泵体铸造成一体，保温效果良好，能够避免焊接夹套产生的各种问题。需加热时：通过热蒸气、导热油等各种热媒通入夹套腔即可进行保温。需冷却时：通过各种冷却液，可以保持泵体的恒温。Especially forhigh viscosity medium consistency of delivery.The pump head, pump shell, seal chamber parts can with insulation jacket.According to the actual need choose the location of the heat reservation.Jacket and pump body casting into an organic whole, heat preservation effect is good, can avoid weldingall kinds of problems.: when heating by hot steam, heat conduction oil and other heat medium access jacketed cavity insulation can be achieved.When need cooling: through a variety of cooling fluid, pump body can maintain a constant temperature.
    广泛应用于各种流体的输送行业，尤其对于处理粘度变化较大、范围较宽的流体输送。　应用行业：适用于输送纯净且有一定粘度的流体，可用于输送油品如润滑油、原油等；也可以用来输送橡胶、沥青、油漆、粘合剂、染料、涂料、润滑剂、多元醇、食品、药品等不含颗粒性杂质的高粘度物料；还可用于输送PA PB PC PE PS HIPS ABS PP PET PVA等高温、高粘度聚合物熔体物料。
     夹套保温泵的结构特点如下 : The structure of the jacketed heat pump features below:
    夹套保温泵体分为普通与不锈钢两种材质，均带有保温套，适用于常温下有凝固性或结晶而通过加温并保持一定温度又容易流动且有润滑性的液体，以及高寒地区室外安装和工艺过程中需要保温的场合。Jacketed heat pump body is divided into ordinary and two kinds of stainless steel material, with thermal insulation cover, under applicable interesting coagulability or crystallization by heating and maintain a certain temperature and lubricity and easy flow of liquid, need in the process of the high altitude and outdoor installation process and heat preservation. 该夹套保温泵的泵体设有空心夹层，并设有进出口法兰，可用于导热油、蒸气、热水、冷水等媒体对输送的液体和泵进行保温、加热及冷却。沥青保温泵开始工作时首先预热降低了泵的起动功率。适用于输送有腐蚀性或无腐蚀性、卫生条件要求较高的液体，输送介质不含固体颗粒，温度不高于 350 ℃ ，粘度为 5cSt——1500cSt 的液体，如各种化工原料、灌装医药、食品、化妆品、农药、洗涤剂、印染、酿造、树脂、胶类等行业。该泵传动方式有电机直联和减速机两种，当液体粘度超过 1500cSt 时，应采用减速机传动。The jacketed heat pump pump body has a hollow nterlayer, with import and export of flange, can be used in the thermal oil, steam, hot water, cold water and other media to the transportation of liquid and pump for heat preservation, heating and cooling.Asphalt heat pump starts to work first preheating reduces the starting power of the pump.Applicable to transport corrosive or non-corrosive, health conditions to demand higher liquid, medium not containing solid particles, the temperature is not higher than 350 ℃, the viscosity of liquid for 5 CST - 1500 CST, such as filling a variety of chemical raw materials, pharmaceutical, food, cosmetics, pesticide, detergent, printing and dyeing, brewing, resin, rubber and other industries.The pump drive way has two kinds of motor and deceleration machine, when more than 1500 CST liquid viscosity reducer drive should be adopted.