| 首页 关于远东 产品目录 销售网络 生产设备 公司资质 技术支持 联系我们 远东泵业螺杆泵(包括双螺杆泵,三螺杆泵,单螺杆泵)检验规则 泵在主要零件材质、制造精度、装配精度检验和液压试验合格后,方能进行试运转。Pump in the major parts material, manufacture, assembly precision accuracy test and hydraulic test after passing the required test run. 泵试验方法应遵守第6章规定。Should comply with the requirements of the chapter 6 of the pump test method. 型式检验Type of inspection 新产品首制样机应进行型式检验。The first new product prototype should be type test. 系列新产品只对该系列的基本样机进行型式检验;检验合格后,比该样机功率小、排出压力低的新产品样机可不做型式检验。Series of new products only basic prototype of the series type inspection; After inspection, small power, low exhaust pressure than the prototype of the new product prototype doesn't do type test. 转厂螺杆泵(包括双螺杆泵,三螺杆泵,单螺杆泵)应进行型式检验Turn factory screw pump (including double screw pump, three screw pump, single screw pump) should conduct pilot test 产品在设计、工艺及材料有重大变化时应做型式检验。 In product design, process and material have a major change in type test should be done. 抽查检验 Random inspection 成批生产的产品应定期做抽查检验。抽查方案按表10规定的一次抽样方案。抽样时间应均衡地分布在1年中。 Batch production of products should be do random inspection on a regular basis. Selective examination scheme specified in table 10 a sampling plan. Distribution of sampling time should be balanced in 1 year. 抽查检验的产品不合格时,应加倍台数复检。如仍不合格时,则应逐台检验。 Random inspection of the product is unqualified, it shall reinspect double the Numbers. If it is still not qualified, should by inspection.
|
单螺杆泵包括:
EH(U)系列单螺杆泵、EL单螺杆泵、ER单螺杆泵、ES单螺杆泵、EU单螺杆泵
|